Home » Pruebas de Disco sobre FCP basado en SCST

Pruebas de Disco sobre FCP basado en SCST

Para poner a prueba  el disco de fibra creado en el anterior post vamos a disponer de un servidor con Windows Server 2008 y una HBA Emulex LP-10000DC  con drivers en modo Initiator. El escenario creado para esta prueba es el siguiente:

Resumiendo: El servidor Centos con kernel vanilla preparado con proyecto SCST y una HBA con drivers en modo target es configurado para proporcinar un disco virtual(vdisk) a la SAN.  El disco virtual es un fichero que a través del módulo SCST es ofrecido por fibra óptica ( HBA operando en modo target). Por otro lado disponemos de un servidor con un sistema operativo Windows Server 2008  SP1, que dispone de una HBA operando en modo Initiator. Las dos HBAs están conectadas a una SAN y se ha realizado un zonning en el switch de fibra de forma que el Initiator pueda ver la lun correspondiente al vdisk.

Comprobación: Desde el servidor Windows se ve correctamente el disco de fibra creado, desde su administrador de dispositivos:

Aparecen dos discos tipo "disk drives" debido a que la HBA es de dos puertos y están zoneados al mismo disco. Hemos operado con sólo uno de los discos y lo hemos inicializado sin problemas:

 

Desde el servidor Centos comprobamos las sesiones en el target por los initiators (son dos, uno por cada puerto de la HBA Emulex usada):

 

# cat /proc/scsi_tgt/sessions

Target name          Initiator name                                Group name                   Active/All Commands Count

qla2x00tgt           10:00:00:00:c9:4f:56:a0                       Default                             0/0

qla2x00tgt           10:00:00:00:c9:4f:56:9f                       Default                             0/0

 

Inicialmente, provocando simultáneas I/Os sobre la lun (copia,  lectura y borrado de ficheros) se obtienen resultados  satisfactorios.

Por otro lado, ya  estamos preparando nuestro próximo proyecto …. la emulación de una librería virtual de cintas (VTL) sobre FC basado en el proyecto mhvtl que  usamos en nuestro laboratorio en su versión para iSCSI.
 

2 Responses to “Pruebas de Disco sobre FCP basado en SCST”

  1. I know this if off topic but I’m looking into starting my
    own blog and was curious what all is required to
    get setup? I’m assuming having a blog like yours would cost
    a pretty penny? I’m not very internet smart so
    I’m not 100% sure. Any tips or advice would be greatly appreciated.
    Many thanks

  2. asmr but dice:

    I’m not sure where you’re getting your information, but
    great topic. I needs to spend some time learning more or understanding more.
    Thanks for fantastic info I was looking for this information for my mission.

  3. asmr when dice:

    Wonderful blog! I found it while surfing around on Yahoo News.
    Do you have any tips on how to get listed in Yahoo News?

    I’ve been trying for a while but I never seem to get there!
    Thanks

  4. idn poker99 dice:

    Thanks for sharing your thoughts on CentOS. Regards

    Also visit my web blog: idn poker99

  5. Vodkapoker dice:

    Terima kasih dan selamat datang di Vodkapoker game online terbaik dan terpercaya di indonesia .
    Promo VODKAPOKER99.LIFE
    – BONUS DEPOSIT Up To 40% u/K NEW MEMBER.
    – BONUS HARIAN Rp.10.000 Setiap harinya 1x Per-ID. Jika Deposit MInimal Rp.100.000
    – BONUS TURNOVER (TO) 0,3% Setiap Minggunya.
    – BONUS REFERRAL 15% Seumur Hidup.

    Itu Yaa Boss kuu Bonus Dari Vodka Poker ^_^
    Ayo buruan nikmati promo yanng ada di VODKAPOKER99.LIFE

  6. I like the helpful information you provide in your articles.
    I will bookmark your weblog and check again here regularly.
    I am quite sure I’ll learn a lot of new stuff right here!

    Best of luck for the next!

  7. I do not even know how I ended up here, but I thought this
    post was good. I don’t know who you are but certainly
    you are going to a famous blogger if you aren’t already 😉 Cheers!

  8. I really like your blog.. very nice colors & theme.
    Did you design this website yourself or did you hire someone to do it for you?

    Plz respond as I’m looking to create my own blog and would like to find out where
    u got this from. many thanks

  9. I was suggested this web site by my cousin. I am not sure whether this post is written by him as no one else know such
    detailed about my difficulty. You’re amazing!
    Thanks!

  10. Fantastic site. Plenty of useful info here. I am sending
    it to some pals ans additionally sharing in delicious.
    And certainly, thank you for your effort!

  11. Fantastic blog! Do you have any hints for aspiring writers?
    I’m hoping to start my own site soon but I’m a little lost on everything.

    Would you advise starting with a free platform like WordPress or go for a paid option? There are so many choices out there that I’m completely confused ..
    Any recommendations? Thanks!

  12. Hey there! This is my 1st comment here so I just wanted to give a quick shout out and say
    I genuinely enjoy reading your posts. Can you suggest any other blogs/websites/forums that cover the same subjects?
    Thank you so much!

  13. minecraft dice:

    Hi just wanted to give you a brief heads up and let you know a few of the pictures aren’t loading correctly.

    I’m not sure why but I think its a linking issue. I’ve tried
    it in two different internet browsers and both show the same outcome.

  14. […] sobre fibra óptica. Su implementación está basada en los trabajos ya publicados sobre mhVTL y SCST.  Siguiendo con la configuración SAN del post anterior, hemos conseguido emular una librería […]

  15. […] El el siguiente post pondremos a prueba nuestro disco creado, usando un initiator de fibra sobre un … […]

Responder a http://bitly.com/3qC1GSC Cancelar la respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *